Crushers
SMD-119A CRUSHER (KSD-600)
| №№ p / p | Part Name |
|---|---|
| 1 | Bolt M30x180 297-2-0-1 |
| 2 | Bolt M24x165 297-2-0-4 |
| 3 | Bolt M20x240 297-5-0-2 |
| 4 | Bolt M20x75 |
| 5 | Bolt 297-9-0-8 |
| 6 | Special bolt SM561-1-0-27 |
| 7 | Eccentric shaft assembly 297-6-0-0 |
| 8 | Cam shaft 297-6-0-8 |
| 9 | Vertical shaft 297-9-0-1 |
| 10 | Drive shaft SM561-7-0-17A |
| 11 | Funnel 297-2-2-0 |
| 12 | The collar is dusty. 297-5-0-3 |
| 13 | Sleeve SMD119.01.002 |
| 14 | SMD119.02.108 sleeve (directional sleeve SM561-2-3-0) |
| 15 | Top bush 297-1-0-2 (bronze) |
| 16 | Lower sleeve 297-1-0-3 (bronze) |
| 17 | Bushing 297-1-0-12 |
| 18 | Top conical sleeve 297-6-0-2 (bronze) |
| 19 | Lower conical sleeve 297-6-0-7 (bronze) |
| 20 | Special nut SM561-1-0-23 |
| 21 | Nut M24 STP205 |
| 22 | Upper disc 297-6-0-5 |
| 23 | Carter SMD119.06.001 |
| 24 | Safety valve SMD 119.15.150 |
| 25 | Casing 297-9-3-1 |
| 26 | Gear Wheel 297-6-0-1 |
| 27 | Ring motionless 297-1-1-0 |
| 28 | Ring 297-1-1-10 |
| 29 | Lock nut M24 STP 206 |
| 30 | Fixed crushing cone (assembled) with funnel and adjusting housing 297-2-0-0 |
| 31 | Fixed crushing cone 297-2-1-2 |
| 32 | Mobile crushing cone 297-4-0-1 |
| 33 | Bearing cone assembly with a shell 297-4-2-0 |
| 34 | Carrier Cone 297-4-2-1 |
| 35 | Mobile crushing cone 297-9-0-0 |
| 36 | Crusher body 297-1-0-0 |
| 37 | Fixed Cone Housing (Assembled) 297-2-1-0 |
| 38 | Fixed cone body 297-2-1-1 |
| 39 | Installation housing 297-2-3-0 |
| 40 | Housing assembly 297-2-6-0 (same as 297-2-1-1, only with shell welding) |
| 41 | Thrust bearing cover 297-1-0-6 |
| 42 | Crankcase Cover SM 561-7-0-19 |
| 43 | Oil station SMD119.15.000 |
| 44 | Slot Adjustment Mechanism 297-0-1-0 |
| 45 | Shell 297-4-2-2 |
| 46 | Foundation of SMD 119A.03.003 (297-5-0-5) |
| 47 | Finger 297-2-5-0 |
| 48 | Thrust bearing plate lower CM 561-6-0-15 |
| 49 | Loading platform SMD119A.00.300 (297-0-2-0) |
| 50 | Bed SMD119A.03.000-01 |
| 51 | Spherical thrust bearing SMD119A.03.006 |
| 52 | Half support ring 297-9-0-4 |
| 53 | Drive SMD119.06.000 |
| 54 | Gasket l-2.0 297-9-0-2 |
| 55 | Gasket l-1,0 297-9-0-2-01 |
| 56 | Belleville spring 561-2-0-7 |
| 57 | Slide L6.01.01.09.01 |
| 58 | Spring CM 561-1-0-4 |
| 59 | Wedge Sector 297-9-0-3 |
| 60 | Glass 297-9-4-01 |
| 61 | Bed 297-1-0-1 |
| 62 | Stopper SM 561-1-0-21A |
| 63 | Stopper SM561-6-0-17 |
| 64 | Spring plate 297-1-0-8 |
| 65 | Ratchet 297-1-0-20 |
| 66 | Lining 297-1-0-7 |
| 67 | Lining CM561-7-0-16 |
| 68 | Clamp 297-5-1-0 |
| 69 | Cup 297-9-0-5 |
| 70 | Washer SM561-2-0-3 |
| 71 | Guide washer SM561-2-3-0 |
| 72 | Textolite washer |
| 73 | Lock washer D 38 |
| 74 | Gear wheel conic SM561-7-0-3 |
| 75 | Electric motor pulley SMD119A.00.004 |
| 76 | Pulley SMD119A.00.005 (561-7-0-4) |
| 77 | Pin 16h11x60 |
CRUSHER SMD 116A
| № p / p | Name |
|---|---|
| 1 | Boss SMD116A.01.031 |
| 2 | Bolt SMD116A.01.01.005 |
| 3 | Stop bolt S182B-00-13 |
| 4 | Bolt armor S182B-00-14 |
| 5 | Shaft SMD116A.01.01.003 |
| 6 | Shaft with a cheek SMD116A.01.01.070 |
| 7 | Screw SMD 116A.01.01.033 |
| 8 | Screw SMD116A.01.02.001 |
| 9 | Sleeve SMD116.01.01.015 |
| 10 | Sleeve SMD116.01.01.038 |
| 11 | Sleeve SMD116.01.01.045 |
| 12 | Wedge front SMD116A.01.02.005 |
| 13 | Wedge rear S182B-02.2 |
| 14 | Lever housing SMD116A.01.01.040 |
| 15 | Cover SMD116A.01.00.002 |
| 16 | Cover SMD116A.01.01.012 |
| 17 | Cover SMD116A.01.01.013 |
| 18 | Cover SMD116A.01.01.014 |
| 19 | Cover SMD116A.01.01.017 |
| 20 | Adjusting mechanism SMD116A.01.02.000 |
| 21 | Axis SMD116A.01.01.034 |
| 22 | Axis SMD116A.01.01.041 |
| 23 | Strip SMD116.01.01.039 |
| 24 | Spacer plate SMD116A.01.00.005 |
| 25 | The plate crushing motionless S182B-00-027 |
| 26 | Sliding crushing plate SMD116A.01.01.002 |
| 27 | Slider SMD116.01.01.067 |
| 28 | Gasket SMD116A.01.01.006 |
| 29 | Gasket SMD116A.01.01.042 |
| 30 | Counterweight SMD116A.01.01.008 |
| 31 | Spring SMD116A.01.01.036 |
| 32 | Spring S182B-00-6 |
| 33 | Roller SMD116A.01.01.032 |
| 34 | Lever SMD116A.01.01.020 |
| 35 | Lever SMD116A.01.01.050 |
| 36 | Slide L6.01.01.09.0.01 |
| 37 | Earring SMD116A.01.01.056 |
| 38 | Stanina SMD116A.01.00.001 |
| 39 | Link S182B-00-3 |
| 40 | Emphasis SMD116A.01.01.029 |
| 41 | Washer S182B00-4 |
| 42 | Washer S182B-00-5A |
| 43 | Washer S 182B00-15 |
| 44 | Pulley with safety device SMD116A.01.010 |
| 45 | Pulley SMD116A.01.01.028 |
| 46 | Pulley S182B-34V |
| 47 | Stock SMD116A.01.01.037 |
| 48 | Cheek assembly SMD116A.01.01.000 |
| 49 | SMD rod 116A.01.01.001 |
| 51 | Spherical thrust bearing SMD119A.03.006 |
| 52 | Half support ring 297-9-0-4 |
| 53 | Drive SMD119.06.000 |
| 54 | Gasket l-2.0 297-9-0-2 |
| 55 | Gasket l-1,0 297-9-0-2-01 |
| 56 | Belleville spring 561-2-0-7 |
| 57 | Slide L6.01.01.09.01 |
| 58 | Spring CM 561-1-0-4 |
| 59 | Wedge Sector 297-9-0-3 |
| 60 | Glass 297-9-4-01 |
| 61 | Bed 297-1-0-1 |
| 62 | Stopper SM 561-1-0-21A |
| 63 | Stopper SM561-6-0-17 |
| 64 | Spring plate 297-1-0-8 |
| 65 | Ratchet 297-1-0-20 |
| 66 | Lining 297-1-0-7 |
| 67 | Lining CM561-7-0-16 |
| 68 | Clamp 297-5-1-0 |
| 69 | Cup 297-9-0-5 |
| 70 | Washer SM561-2-0-3 |
| 71 | Guide washer SM561-2-3-0 |
| 72 | Textolite washer |
| 73 | Lock washer D 38 |
| 74 | Gear wheel conic SM561-7-0-3 |
| 75 | Electric motor pulley SMD119A.00.004 |
| 76 | Pulley SMD119A.00.005 (561-7-0-4) |
| 77 | Pin 16h11x60 |
KID-600 CRUSHER
| №№ p / p | Part Name |
|---|---|
| 1 | Drive unit 138ДРА.01.000 |
| 2 | Bolt 138DRA.03.600 |
| 3 | Armor 138DRA.03.013 |
| 4 | Armor 138DRA.04.001 |
| 5 | Drive shaft 138DRA.01.002 |
| 6 | Intermediate shaft 138ДРА.02.009 |
| 7 | Vertical shaft 138DRA.03.005 |
| 8 | Vibration exciter 138DRA.02.000 |
| 9 | Vibration exciter 651.01.02.000-05 |
| 10 | Vibration isolator (rubber) 138ДРА.00.019 |
| 11 | Funnel 138DRA.04.100 |
| 12 | Hydraulic jack 138DRA.16.500 |
| 13 | Imbalance in total 138DRA.02.400 |
| 14 | Unbalance assembly 651.01.02.100-04 |
| 15 | Unbalance assembly 651.01.02.100-05 |
| 16 | Debalance 651.01.02.102 |
| 17 | Debalance 651.01.02.102-04 |
| 18 | Debalance 651.01.02.102-05 |
| 19 | Disk 138DRA.03.400 |
| 20 | Ring (rubber) 138ДРА.02.013 |
| 21 | Ring (rubber) 138ДРА.03.500 |
| 22 | Adjusting ring 138ДРА.04.000 |
| 23 | Ring 138DRA.04.006 |
| 24 | Protective ring 138ДРА.06.108 |
| 25 | Protective ring 138ДРА.06.109 |
| 26 | Crushing cone 138ДРА.03.000 |
| 27 | Bearing cone 138DRA.03.012 |
| 28 | Housing 138DRA.01.001 |
| 29 | Housing assembly 138DRA.02.200 |
| 30 | Housing 138DRA.04.002 |
| 31 | Cup body 138DRA.05.001 |
| 32 | Cover 138DRA.02.012 |
| 33 | Cover 138DRA.04.005 |
| 34 | Cup (rubber) 138ДРА.05.003 |
| 35 | Oil collection 138DRA.02.060 |
| 36 | Shell 138DRA. 05.004 |
| 37 | Cone support 138DRA.05.000 |
| 38 | Spherical support 138DRA.05.002 |
| 39 | Bearing 138DRA.02.008 |
| 40 | Bearing 138DRA.02.300 |
| 41 | Bearing top 138DRA.02.210 |
| 42 | Lower bearing 138DRA.02.220 |
| 43 | Bearing 651.01.02.110 |
| 44 | Polumufta 138DRA.02.007 |
| 45 | Polumufta 138DRA.02.080 |
| 46 | Belleville spring 138DRA.06.111 |
| 47 | Glass 138DRA.01.003 |
| 48 | Suhara 138DRA.04.003 |
| 49 | Flange 138DRA.02.202 |
| 50 | Pulley 138DRA.01.009 |
| 51 | Spindle 138DRA.02.011 |
| 69 | Cup 297-9-0-5 |
| 70 | Washer SM561-2-0-3 |
| 71 | Guide washer SM561-2-3-0 |
| 72 | Textolite washer |
| 73 | Lock washer D 38 |
| 74 | Gear wheel conic SM561-7-0-3 |
| 75 | Electric motor pulley SMD119A.00.004 |
| 76 | Pulley SMD119A.00.005 (561-7-0-4) |
| 77 | Pin 16h11x60 |
CRUSHER SHDS-600 (SMD-110A)
| №№ p / p | Part Name |
|---|---|
| 1 | Bolt 890.00.021 |
| 2 | Bolt 890.02.008-06 |
| 3 | Screw 890.03.001 |
| 4 | Sleeve 890.02.013 |
| 5 | Sleeve 890.03.008 |
| 6 | Nut 890.01.053 |
| 7 | Nut 890.01.054 |
| 8 | Nut 890.02.024 |
| 9 | Nut 890.03.011 (right) |
| 10 | Nut (left) 890.03.012 |
| 11 | Spacer link 890.10.000 |
| 12 | Wedge top right 890.00.006 (with m / o at the request of the customer) |
| 13 | Wedge top left 890.00.007 (with m / o at the request of the customer) |
| 14 | Wedge lower right 890.00.008 (with m / o at the request of the customer0 |
| 15 | Wedge lower left 890.00.009 (with m / o at the request of the customer) |
| 16 | Wedge adjusting 890.03.005 (with m / o at the request of the customer) |
| 17 | Wedge top (left) 890.00.007 |
| 18 | Wedge top (right) 890.00.006 |
| 19 | Wedge lower (left) 890.00.009 |
| 20 | Wedge lower (right) 890.00.008 |
| 21 | Wedge adjusting 890.03.005 |
| 22 | Ring 890.02.014-01 |
| 23 | Ring 890.02.015-01 |
| 24 | Ring 890.02.021 |
| 25 | Rubber ring 890.02.026 |
| 26 | Cheek cover 890.02.001-01 (with m / o as per customer's request) |
| 27 | Cup lid 890.02.004 |
| 28 | Flywheel 890.02.007 |
| 29 | Slot adjustment mechanism 890.03.000 |
| 30 | Flywheel guard 890.05.000 |
| 31 | Spring guard 890.12.000 |
| 32 | Here are 890.00.019 |
| 33 | Plank 890.02.019 |
| 34 | Plank 890.02.022 |
| 35 | Plank 390.02.028 |
| 36 | Plate crushing (fixed) 890.00.002 |
| 37 | The plate crushing (mobile) 890.02.016 |
| 38 | Spacer plate 890.00.013 |
| 39 | Slider 890.03.100 |
| 40 | Drive mechanism for regulating the output slit |
| 41 | Gasket (cardboard) 890.02.002 |
| 42 | Gasket (cardboard) 890.02.002-01 |
| 43 | Gasket (cardboard) 890.02.005 |
| 44 | Spring 890.00.016 |
| 45 | Spring 890.02.037 |
| 46 | Lever 890.00.004 |
| 47 | Glass left 890.02.100 |
| 48 | Glass left 890.02.101 (with a disk) |
| 49 | Glass right 890.02.200 |
| 50 | Glass right 890.02.201 |
Crusher KID300A
| №№ p / p | Part Name |
|---|---|
| 1 | Drive unit 139DR.01.000 |
| 2 | Armor 139DR.03.018 |
| 3 | Armor 139DR.10.101 |
| 4 | Val 139DR 01.002 |
| 5 | Shaft 139DR.02.013 intermediate |
| 6 | Val 139DR 03.016 |
| 7 | Vibration exciter 139DR.02.000 |
| 8 | Funnel 139DR.10.120 |
| 9 | Sleeve (rubber) 139DR.00.013 |
| 10 | Sleeve 139DR.01.004 |
| 11 | Bushing 139DR.01.005 |
| 12 | Sleeve 139DR.01.009 |
| 13 | Sleeve 139DR.01.011 |
| 14 | Nut 139DR.03.300 |
| 15 | Nut 139DR.03.301 |
| 16 | Nut139DR.10.106 |
| 17 | Debalance 139DR.02.001 |
| 18 | Debalance 139DR.02.002 |
| 19 | Debalance 139DR.02.500 |
| 20 | Disk (rubber) 139DR.02.005 |
| 21 | Disc 139DR.02.008 |
| 22 | Disk 139DR.02.502 |
| 23 | Cover assembly 139DR 10.200 |
| 24 | Support ring 139DR.00.001 |
| 25 | O-ring (rubber) 139DR.03.019 |
| 26 | Ring of fire 139DR.03.200 |
| 27 | Regulating ring 149DR.10.000 |
| 28 | Ring 139DR.10.100 |
| 29 | Ring 139DR.10.105 |
| 30 | Crushing cone 139DR.03.000 |
| 31 | Bearing cone 139DR.03.017 |
| 32 | Building 139DR.01.001 |
| 33 | Housing assembly 139DR.02.200 |
| 34 | Case 139DR.02.230 |
| 35 | Bearing body 139DR.05.006 |
| 36 | Cover 139DR.02.004 |
| 37 | Oil collection 139DR.02.400 |
| 38 | Oil system 139DR.50.000 |
| 39 | Shell 139DRE.04.05.009 |
| 40 | Cone Bearing 139DR.05.000 |
| 41 | Spherical support 139DR.05.007 |
| 42 | Plank 139DR.02.600 |
| 43 | Thrust bearing 139DR.02.016 |
| 44 | Thrust bearing 139DR.02.300 |
| 45 | Vibrator Bearing 139DR.02.100 |
| 46 | Bearing 139DR.01.210 |
| 47 | Bearing 139DR 02.220 |
| 48 | Polumufta 139DR.02.012 |
| 49 | Polumufta 139DR.02.014 |
CRUSHER SHDS-400 (SMD 109A)
| №№ p / p | Part Name |
|---|---|
| 1 | Val 782.02.001 |
| 2 | Screw 782.03.002 |
| 3 | Sleeve 782.02.011 |
| 4 | Sleeve 782.02.013 |
| 5 | Special right nut 782.03.008 |
| 6 | Special left nut 782.03.009 |
| 7 | Wedge adjusting (with m / o at the request of the customer) 782.03.011 |
| 8 | Wedge 782.02.015 |
| 9 | Wedge 782.02.014 |
| 10 | Wedge top (left) 782.00.006 |
| 11 | Wedge top (right) 782.00.005 |
| 12 | Wedge lower (left) 782.00.015 |
| 13 | Wedge lower (right) 782.00.014 |
| 14 | Wedge adjusting 782.03.011 |
| 15 | Ring 782.02.009 |
| 16 | Thrust ring 782.02.026 |
| 17 | Ring 782.02.027 |
| 18 | Bracket 782.10.000 |
| 19 | Housing cover (with m / o at the request of the customer) 782.01.301 |
| 20 | Cup lid 782.02.004 |
| 21 | Cheek Cover 782.02.006 |
| 22 | Flywheel 782.02.028 |
| 23 | Slot adjustment mechanism 782.03.000 |
| 24 | Finger 782.05.001 |
| 25 | Plank 782.03.005 |
| 26 | Fixed crushing plate 782.00.004 |
| 27 | Sliding crushing plate 782.02.012 |
| 28 | Spacer plate 782.00.007 |
| 29 | Slider 782.03.101 |
| 30 | Left glass (with disk) 782.02.100 |
| 31 | Glass left 782.02.101 |
| 32 | Glass right (with a disk) 782.02.200 |
| 33 | Glass right 782.02.2018 |
| 34 | Draft of a spring (assembled) 782.12.000 |
| 35 | Rod 782.12.001 |
| 36 | Apron 782.03.007 (rubber) |
| 37 | Pulley 788.02.029 |
| 38 | Electric pulley 782.05.002 |
| 39 | The key is tangential 782.02.031 |
| 40 | Cheek assembly 782.02.000 |
| 42 | Plank 139DR.02.600 |
| 43 | Thrust bearing 139DR.02.016 |
| 44 | Thrust bearing 139DR.02.300 |
| 45 | Vibrator Bearing 139DR.02.100 |
| 46 | Bearing 139DR.01.210 |
| 47 | Bearing 139DR 02.220 |
| 48 | Polumufta 139DR.02.012 |
| 49 | Polumufta 139DR.02.014 |
